This standard selection of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing limited integration of the motor to the machine. Angular backlash of less than 1 arc-minutes is provided standard.
They are available in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of electric motor couplings and mounting flanges are available for assembly to practically all servo motors, and the hollow bore result can be used to mount result shafts, pinion shafts, or other drive elements.
Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors possess a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors are designed so that they guarantee you a low-noise system environment. Moreover, these gearmotors offer you superb attenuation properties for the operation of your systems with low degrees of vibration. This is usually due to the longitudinal software of power on the insight shaft. This enables torque impulses to end up being prevented effectively and for maximum results in conditions of running smoothness and sound reduction to be performed.
Both the gear unit, and the synchronous servomotor derive from our modular program. This allows you to have fully individual configuration opportunities for each application. One matter is certain – Our servo gearmotors are actual specialists for very specific requirements.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, quickness reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the form of a screw, also called a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A primary benefit of worm gear reducers is certainly that they generate an output that’s 90° from the input and can be utilized to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox has right hand threads; to change the path of the output, a left-hands thread worm gearbox is necessary.
At times a motor’s capability could be limited to the main point where it requires gearing. As servo producers develop better motors that can muscle mass applications through more complicated moves and generate higher torques and speeds, these motors require gearheads add up to the task.