DC MOTOR PUMP GROUP one
General Description
Consisting of the heavy duty DC motor along with the CB1S gear pump, this pump motor group is an excellent hydraulic electrical power unit for mobile hydraulic equipments, this kind of as car carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Standard Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check valve.
DC MOTOR PUMP GROUP 3
Basic Description
This motor pump includes a 4.5″ DC motor and a CBSR gear pump that has a standard energy up/gravity down circuit having a relief valve, a verify valve in addition to a solenoid release valve.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic elements concerned in advance of mounting the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which should really also be clean and totally free of impurities. N46 hydraulic oil is encouraged.
four. The power unit really should be mounted horizontally.
five. The relief valve strain is preset about 25% higher compared to the operating pressure.
six. Flow handle valve for lowing speed adjustment is obtainable unpon request.